10% of 25 tons of coal per hour (input grain size 0-30 mm) – it has a moisture scavenging capacity of 25%.The diameter will be 2600 mm, the height will be 24000 mm.The thickness of the body iron plate will be 18 mm and 52 mm.The fuselage wing sheets will be 8 mm st 37 quality.The oven interior will be covered with 8 mm stainless steel and the 3750mm part will be covered.Two chambers specially designed for the entrance and exit of the oven will be manufactured, and fireproof iron plate will be applied with a labyrinth to ensure sealing.Two bandages will be installed on the body with cushioning.By manufacturing the bandages with cushioning, the gale rings will be mounted on the body without welding. For this reason, the gale welding cracking occurring in the furnace body will be prevented.4 Large Bandage Wheels will be manufactured, they will be made of 4140 quality steel. After manufacturing, the surface of the gale wheels will be hardened by heat treatment.It will be supported by 2 Retaining Rollers. The rollers will be manufactured as cast steel of 4140 quality. The diameter of the retaining reel will be 700mm. After manufacturing, surface hardening is applied by heat treatment.For the drive, the sprocket, chain and tensioning system will be installed. 4 inc. ratchet will be used. A 55 KW electric motor and a special manufacturing clutch-free reducer will be used.In order to adjust the rotary kiln rotation speed, the speed driver suitable for heavy working conditions will be used.The flow of hot air and coal will be direct current.It will be manufactured in one piece.The furnace body will be heat-insulated, a heat blanket and an aluminum cladding sheet will be used for thermal insulation.Two chassis will be manufactured for the gale wheels. The engine will be gamak brand.
